Ion Exchange Resin for Deionization of Reverse Osmosis
Water
For Ultra Pure Analytical Grade Water
Deion Ultra is a ready-to-use resin mix designed for producing ultra-pure
analytical grade water (conductivity up to 0.08-0.06 μS).
It is used in addition to a traditional reverse osmosis system (forming an
RO-DI system) to remove all residual salts. It is suitable for both marine and
freshwater aquariums. Do not use to treat water already present in the tank.
The resin's lifespan depends on the purity of the incoming water, and the only
waste products are H+ and OH- ions, which recombine to form ultra-pure H2O. No
sodium is present in the output. For proper use, the resin can be placed inside
a 10” filter, connected directly to the output of the reverse osmosis system.
Deion is particularly suitable for starting up tanks and topping off evaporated
water. Once exhausted, the resin should be replaced. Average particle diameter:
0.6 - 0.8 mm To assess the residual effectiveness of the resin, it is
recommended to install a conductivity meter or a TDS meter (Total Dissolved
Solids meter) at the system output.
Place the contents of the package into a refillable
cartridge and then inside the filter (vessel) at the output of the reverse
osmosis system. The resin is preserved with a preservative liquid that may have
a pungent odor. Do not sniff. At first use, rinse with osmotic water or discard
a volume of water equal to 3-4 times the amount of resin used.
H319 Causes serious
eye irritation
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P264 Wash hands and exposed parts of the body thoroughly after handling.
P280 Wear eye protection.
P337+P313 If eye irritation persists, get medical advice
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.